Flow-through versus Batch Models

There are two main types of water ionizers, "flow-through" and "batch" models. Flow-through models connect to your faucet or plumbing line and electrify the water as it flows through. Almost all of the ionizers on the market are flow-through. Batch models hold water in two tanks, one acid, and one alkaline, separated by a porous membrane, and electrify the water as it sits, allowing for much more contact time with the water. Batch models therefore make acid and alkaline waters with pH and electrical charge (oxygen-reduction potential, or ORP) tens to hundreds of times stronger than flow-through models. (The pH scale, a measure of acidity and alkalinity, is logarithmic, so every single digit increase in pH represents a tenfold increase.) Expensive flow-through ionizers that connect to your faucet such as Jupiter, Kangen, Enagic, Tyent, Microwater, Delphi, and other brands essentially make weak ionized water for continual drinking, but it is not as rejuvenative as the much stronger super ionized waters from batch models. Batch models have a water reservoir that holds water for 1 to 12 hours while it is electrified with direct current electricity. This is known as hydrolysis, and it separates hundreds of millions of H2O molecules in each batch into OH- (alkaline) and H+ (acid) ions.

pH (Ion Content) Versus ORP (Electrical Charge)

It's important to understand a little background to make an informed purchasing decision. pH, or potential of hydrogen, is a measurement of acidity or alkalinity, or more specifically, the amount of positive H+ and negative OH- ions in the water. A pH of 7 is neutral, below that is acid, above is alkaline. The pH scale is logarithmic, so every single digit increase in pH represents a tenfold increase. Oxygen-reduction potential, or ORP, is a measure of how electrically charged and chemically reactive water is, and is measured in millivolts. Alkaline water measures between zero and about -1,200 millivolts (thousandths of a volt), acid water measures between zero and about +1,200 millivolts. According to Dr. Yoshiaki Matsuo PhD, a contributing inventor of the water ionizer, redox potential, or ORP, is more important than pH for alkalizing the body. It is the electrical charge of the water that is most important factor in receiving health benefits, pH is a secondary effect of the electrical charge and the amount of minerals in the water to hold the charge. With chemically treated pH solutions, you can have high alkaline pH with low ORP and miss out on the main benefits.

Getting Beyond The Hype of Ionizer Ads

Hydrolysis is a very simple process. Electrodes are immersed in the water and send positive DC voltage into one side of the ionizer to make acid water, and negative into the other side to make alkaline water. Electrode size, contact time with water, voltage, and the mineral content of the water are what determine how strong the ionized water is. Ionizers can only use up to about 24 volts DC to ionize water before the potential of electric shock to the consumer becomes too dangerous. So all consumer ionizers capacities are limited by this voltage. Therefore, the only way to strengthen ORP and pH is to make larger electrodes and lengthen water contact time. Titanium electrodes are very expensive and can only be made so large before the ionizer becomes unaffordable. So a balance must be struck between electrode size and water contact time. The 2G ionizer has smaller electrodes and longer contact time (8 to 12 hours) to make an affordable ionizer that still produces water fast enough to satisfy the daily needs of two or three people.

What They Don't Tell You

YOUR RESULTS ARE DEPENDENT ON YOUR WATER! While it is possible for an ionizer to function correctly with tap water, it is NOT recommended. First of all, flow-through ionizers are dependent on the quality of water that you have coming from your tap. Considering that the Associated Press and others have confirmed that most if not all municipal water in the US is contaminated with pharmaceuticals and chemicals, you must have a comprehensive water purification system in place before a flow-through ionizer that not only removes chemical toxins, but also clears the toxic homeopathic information stored in the subatomic structure of the water (aka water molecule clustering), and returns it to a truly natural "living" state found at the end of the Earth's very complex hydrological cycle. Despite claims, so far the only system we have found that will take any toxic tap water and turn it into pure, living, properly mineralized, properly homeopathically structured alkaline water is the Miracule Water System. Starting at $1,500, it is an amazing system that will create not only healthy water, but very regenerative, detoxifying, energized natural water containing highly regenerative monatomic elements, aka ORMUS. If you buy that system, you do not need an ionizer or other filtration system for drinking water. If you do not have the money for the Miracule system, batch ionized spring water is the next most practical solution for most people.

We have not found any other systems that can do this, so ionizing tap water with any other system is a toxic proposition. The small filters that some ionizers include do not begin to properly purify tap water, even chemically.

Ionizers must have minerals in the water to make ions that give the water a strong pH and electrical charge, The fewer minerals you have in your water, the weaker your ionized water will be. So if you have limited minerals in your tap water, you will have weak ionized water, and many municipal supplies and wells have poorly mineralized water. With a flow-through ionizer, you can't buy good bottled water or add minerals to your tap water to make strong ionized water as with a batch model. So you wind up with alkaline pH values around 10 or lower, typically around 8.5 to 9, as this independent video shows:

You can have the best flow-through ionizer in the world, but if your water has few minerals as with many tap waters, you'll get very weak or neutral ionized water.

Flow-Through Models Yield Poor pH and ORP

But more importantly, flow-through models give poor ORP values around -150 millivolts, as compared to pH 11 and ORP values around -800 millivolts with the 2G batch ionizer. (pH is a logarithmic scale, so pH 11 is 10 times the strength of pH 10.) So comparing flow-through ionizers is a moot point, they're all much inferior to batch models.

So it's important to use a batch ionizer with pure adequately mineralized water. We recommend using good purified well or bottled spring water, with a small amount of liquid sea minerals or unrefined salt (Celtic, Himalayan, etc.) added if needed to adequately mineralize the water. We recommend against using municipal tap water, treated or not, because of the poor homeopathy of the water even when treated; see our info on water purification below.

You Need a Separate Water Purification System

Some flow-through models have filters to slightly clean the water, but none are comprehensive enough to give sufficient purification, it is more of a marketing tactic. Water purification and ionization are two different issues; no ionizer will purify water sufficiently for drinking, although they do kill bacteria. Water purification requires several different processes to sufficiently remove toxins or undesirable elements such as excessive hardness (minerals that can stick to your plumbing pipes and affect your health), volatile organic compounds (VOCs), heavy metals, bacteria, etc. without harming the water. Spending money on a filter in your ionizer is a waste of money. For water purification, we recommend, the Miracule Water System. It does not make water acidic or damage the homeopathic structure of water as do other systems on the market, and very importantly, it adds highly regenerative monatomic ORMUS elements into the water. For water testing, we recommend National Testing Labs, they have a 75-item comprehensive high quality "Watercheck" analysis for 1/2 to 1/3 the price found elsewhere. When buying bottled water, look for spring water in hard (PET) type 1 plastic, or glass if you can find it. (Water in 5-gallon glass bottles is rare these days). Call the producer and ask if the water has gone through reverse osmosis filtration or has been distilled. If so, use another water that has not. RO water is very acidic, both waters have been stripped of minerals, and have poor homeopathy.

The Importance of Platinized Titanium Electrodes

Another key factor for quality is the material the electrodes are made of. Most good ionizers on the market use electrodes made of platinum plated grade 1 titanium. Titanium will not dissolve in your ionized water as will cheaper metals like stainless steel. Titanium is expensive and is a major part of the ionizer cost. The 2G ionizer uses grade 1 titanium electrodes. But titanium is a poor electrical conductor so it needs to be plated with a good electrical conductor that will also not dissolve during electrolysis. Platinum is just such a metal, but since it is more expensive than gold, electrodes cannot affordably be made of solid platinum, hence the titanium/platinum combination.

Maximizing Benefits and Minimizing Expense With Water Ionizers

The 2G Ionizer makes water superior to other ionizers costing thousands of dollars. Flow-through water ionizers really make weakly ionized water for continual drinking throughout the day, not highly rejuvenative super alkaline water. Rather than spending thousands of dollars for weak ionized and possibly polluted drinking water from your faucet, we use super alkaline purified water at full strength in limited amounts and then mix it with purified drinking water to bring the pH up to about 8.5. (You can use pH test drops to test the pH.) This way, we get the benefits of both strong and milder pure ionized water without the high cost.

Uses For Ionized Waters

Super alkaline water is so detoxifying that you must gradually increase the amount consumed to avoid cleanse reactions such as a mild headache. The super acid water is also much more antiseptic than flow-through acid water and is better for its many external uses (see below).

Some alkaline water uses:

• Drink daily to neutralize free radicals in the body, rejuvenate the body and cells, detoxify the body, and increase energy. The OH- ions in alkaline water release oxygen into the cells, which improves cell function and detoxification.
• Mix with good purified drinking water to bring pH up to about 8.5 for good alkalinity. Many bottled, spring, and well waters are acidic.
• Use for cooking, makes food tastier, tenderizes foods.
• Soak beans before cooking to make them more tender and flavorful, and to reduce gas.
• Feed to pets and animals to improve their health and energy, and reduce urine and feces odor.
• Health benefits as reported in Japanese and Korean hospitals: normalizes high or low blood pressure, heals diabetes, Reduces acid buildup in tissues and the blood.

Some acid water uses:

• Athlete's Foot — soak your feet for 20 to 30 minutes daily in full strength water to kill athlete's foot fungus.
• Dental Irrigation — use full strength in an oral irrigator ("water pik") after brushing teeth, then irrigate again with ionized alkaline water or plain water. Kills bacteria and leaves your teeth and gums squeaky clean. Very useful for colds and flus.
• cuts, burns, and insect bites — soaking the affected area for a few minutes relieves pain, itching, and reduces scarring
• Watering plants and sprouts — they love it and it prevents or removes mold. (Just soak sprouting seeds in alkaline water, then water with acid water while growing.)
• Water cut flowers, makes them last longer.
• Cleaning — acid water is more antiseptic than chlorine bleach, yet very safe and nontoxic, so you can use it for washing all kinds of stuff around the house, bathroom and kitchen surfaces, showers and bathtubs, disinfect laundry, dish water, veggies, mix it in window cleaner or veggie wash, etc.
• Use as an astringent on hair and skin, rinse your hair with it to remove conditioner and shampoo buildup.
• Add to bath water and soak during the last 20 or 30 minutes of your bath to improve skin (soaking longer can acidify the body since it will soak into tissue).
• Put it in car window washer fluid, or in just about any water-based cleaner or disinfectant

Storing Ionized Waters

We recommend storing your super alkaline water and drinking water in ceramic dispensers (not glass, plastic, or metal) in your kitchen. Ceramic does not negatively affect the water chemically or energetically as do plastic and metal, and glass will allow light through that de-ionizes the water. Wood containers can hold bacteria and are not recommended. Alkaline water will remain strong for about 4 to 5 days at room temperature in a ceramic crock. Acid water will last much longer, around two weeks, and can be kept in a ceramic, glass, or hard plastic container in a dark cabinet.

• Dimensions: 11 in wide x 5 in deep x 10.5 in tall
• Output: 1 gallon super alkaline water and 1 gallon super acid water every 8 to 12 hours depending on water source
• Power Supply: Works with all residential power outlets worldwide with voltage between 100 to 240 volts, 47 to 63 Hertz, so if your power is within those ranges, it will work in your country. However, you may need a plug adapter to fit your wall outlets. Input: 100 to 240 volts AC, 47 to 63 Hertz, Output: 32 volts DC
• Construction: container– type 1 PET plastic, electrodes– platinum plated ASTM F67 titanium. Electrodes do not dissolve or wear out, and never need replacing.
• Warranty: one-year materials and workmanship, 60 days total satisfaction.

Please note our return policy for this ionizer. See our Policies page for full details on returns and refunds before returning.

Used

If the ionizer has been used and is returned completely clean (no water/food remnants or stains, mold, etc.), dry, and undamaged within 60 days of purchase you will be refunded minus a 15% refurbishing/restocking fee.

Unused

Opened but unused undamaged equipment will be refunded in full.

Return Process

Since different products ship from different locations, you must Contact us before returning an item in order to send it back to the correct address. Returns received by us without prior authorization will be charged a 15% restocking fee plus any shipping, if needed, to the correct warehouse.